You have no items in your shopping cart.

Subtotal: £0.00

Lab Model Trimmer JT-19

More Views

Lab Model Trimmer JT-19

Be the first to review this product

Availability: In stock

£323.00
1. Connect one end of the water tube to the nozzle of the wet model trimmer and the other end to the tap, open the valve
2. Connect the waste-disposal tube to the unit
3. Connect the power cord, and switch on the power switch (O=off, l=on)
4. When braking, it is normal to hear clicking before the sand tablet stops. If the sand tablet makes unusually loud noises, remove it, and use the included hex-wrench to adjust the screw on the back cover (18)

Details

Dental Lab Model Trimmer JT-19


Intructions

1. Connect one end of the water tube to the nozzle of the wet model trimmer and the other end to the tap, open the valve 
2. Connect the waste-disposal tube to the unit 
3. Connect the power cord, and switch on the power switch (O=off, l=on)
4. When braking, it is normal to hear clicking before the sand tablet stops. If the sand tablet makes unusually loud noises, remove it, and use the included hex-wrench to adjust the screw on the back cover (18) 
5. To check if you need to replace the abrasive disk, rotate the disk by hand and estimate: if the platform jumps more than 2mm, change the disk. After replacing the disk, make sure to tighten the ring on the platform 8 (closest to the outside of the sand tablet)


Specifications

Voltage: <A>220V/50Hz±10% ,    <B>110V/60Hz±10%
Power: 500W 
Rotational Speed: 2800 rpm 
Dimensions: 44×35×35cm
Weight of the dental trimmer: 20kg

 

 

 

Additional Information

product ID 16247
Holes No
Plug No
Brand JT

Customer Reviews

Write Your Own Review

You're reviewing: Lab Model Trimmer JT-19

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Price
Quality

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.